聚四氟乙烯造粒料

当前位置: > 产品展示 > 聚四氟乙烯造粒料 >

 纯聚四氟乙烯造粒料Virgin PTFE Free-flow


 
造粒料的优点:
 
  Easy powder handling.   工人容易操作.
  Easy feeding of the mould cavity and the powders distribute evenly in the mould(specially narrow wall thicknesses,automatic molding, isostatic molding, liner,very big or small items) .
  易填模且填充均匀(特别是薄壁件,自动模压,等压成型,衬里,超大件或小产品).
   Very good flow ability compare with competitors.与竞争对手比较具有更好的流动性.
  No others chance in case of complex moulds with undercuts.方便侧面下凹的复杂件成型.
  Higher productivity.  生产效率高.
  Due to lower compression ratio, the tube or rob by using free flow material is higher then that using non-free low mateirals.因为压缩比低,因此同样的模具高度,用造粒料生产出来的毛坯比用粉料生产的毛坯更高。
  Less powdery with better cleanliness during mould feeding.    填模过程少粉末飞扬易清洁.
  Reduced risk of contaminants from the environment .     减少从周边掺入污染物的危险.
 
 
适用的加工工艺:Recommended process for free flow PTFE
筒、棒、管、板和其他成品的普通模压和自动模压
Normal and Automatic molding for the production of big and small billets, rods, tubes, plates and finished parts
 
等压成型,薄壁管,其他产品,例如绝缘子,垫圈等异形件
Isostatic molding for the production of thin wall tubes, finished parts (i.e. insulators), profiled parts (i.e. gaskets)
 
筒、棒、管,导向带的挤出成型
Ram extrusion for the production of rods, tubes, guiding tapes, profiles, billets
 
 

[向上]